|
EDITORS:
EDITOR-IN-CHIEF:
Ljubiša Balanović,
University of Belgrade, Technical Faculty in Bor, Department of Metallurgy Engineering, Serbia
DEPUTY EDITOR-IN-CHIEF:
Dragan Manasijević,
University of Belgrade, Technical Faculty in Bor, Department of Metallurgy Engineering, Serbia
MANAGING EDITOR:
Ivana Marković,
University of Belgrade, Technical Faculty in Bor, Department of Metallurgy Engineering, Serbia
TECHNICAL EDITOR:
Milan Gorgievski,
University of Belgrade, Technical Faculty in Bor, Department of Metallurgy Engineering, Serbia
Miljan Marković,
University of Belgrade, Technical Faculty in Bor, Department of Metallurgy Engineering, Serbia
ENGLISH LANGUAGE EDITOR:
Slavica Stevanović,
University of Belgrade, Technical Faculty in Bor, Serbia
Sandra Vasković,
University of Belgrade, Technical Faculty in Bor, Serbia
ASSOCIATE EDITORS:
Simeon A. Agathopoulos,
University of Ioannina, Department of Materials Science and Engineering, Ioannina, Greece
Milan Antonijević,
University of Belgrade, Technical Faculty in Bor, Bor, Serbia
Milan D. Antonijević,
University of Greenwich, Faculty of Engineering and Science, London, UK
Gabriella Borzone,
University of Genova, Department of Chemistry and Industrial Chemistry, Genova, Italy
Pavel Broz,
Masaryk University, Faculty of Science, Department of Chemistry, Brno, Czech Republic
Raj P. Chhabra,
Indian Institute of Technology Ropar, Department of Chemical Engineering, Rupnagar, India
Kuo-Chih Chou,
University of Science and Technology, Department of Physical Chemistry, Beijing, China
Lesley Cornish,
University of Witwatersrand, School of Processing and Materials Science, Johannesburg, South Africa
Andre L. Costa e Silva,
Federal Fluminense University, School of Industrial Metallurgical Engineering, Volta Redonda, Brasil
Albert Davydov,
Material Science and Engineering Division, Material Measurements Laboratory, National Institute of Standards and Technology, Gaithersburg, USA
Sergei A. Decterov,
Polytechnique de Montréal, Department of Chemical Engineering, Centre for Research in Computational Thermochemistry (CRCT), Québec, Canada
Simone Delsante,
Department of Chemistry and Industrial Chemistry, Genoa University and Genoa Research Unit of INSTM, Genoa, Italy
Yong Du,
Central South University Changsha, State Key Lab of Powder Metallurgy, Hunan, China
Adam Grajcar,
Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Gliwice, Poland
Fathi Habashi,
Laval University, Department of Mining, Metallurgical, and Materials Engineering, Quebec City, Canada
David Hui,
University of New Orleans and NASA National Center for Advanced Manufacturing, New Orleans, USA
Dominika Jendrzejczyk-Handzlik,
AGH University of Science and Technology in Kraków, Faculty of Non-Ferrous Metals, Kraków, Poland
Ari Jokilaakso,
Aalto University, School of Chemical Engineering, Department of Chemical and Metallurgical Engineering, Aalto, Finland
Željko Kamberović,
University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
Gyorgy Kaptay,
University of Miskolc, Faculty of Materials and Metallurgical Engineering, Miskolc, Hungary
Jakob Lamut,
University of Ljubljana, Faculty of Natural Sciences, Ljubljana, Slovenia
Shuhong Liu,
Central South University China, State Key Laboratory of Powder Metallurgy, Changsha, China
Xuewei Lv,
Chongqing University, School of Materials Science and Engineering, Chongqing, China
Ivan Mihajlović,
University of Belgrade, Technical Faculty in Bor, Bor, Serbia
Duško Minić,
University of Priština, Faculty of Technical Science, Kos. Mitrovica, Serbia
John E. Morral,
The Ohio State University, Department of Materials Science and Engineering, Columbus, USA
Takahiro Nomura,
Hokkaido University, Laboratory of Energy Media, Center for Advanced Research of Energy and Materials, Faculty of Engineering, Sapporo, Japan
Rada Novaković,
Institute of Condensed Matter Chemistry and Energy Technologies, National Research Council (ICMATE-CNR), Genoa, Italy
Keyna A.Q. O'Reilly,
University of Oxford, Department of Materials, Oxford, UK
Begoña Santillana,
Research & Development, IJmuiden Technology Centre, Tata Steel, IJmuiden, Netherlands
Piotr R. Scheller,
Freiberg University of Mining and Technology, Institute of Iron and Steel Technology, Freiberg, Germany
Seshadri Seetharaman,
Royal Institute of Technology, Department of Materials Science and Engineering, Stockholm, Sweden
Jaroslav Šestak,
Czech Academy of Sciences, Institute for Physics, Prague, Czech Republic
Hong Yong Sohn,
University of Utah, Metallurgical Engineering & Chemical Engineering, Salt Lake City, Utah, USA
Miroslav Sokić,
Institute for Technology of Nuclear and Other Mineral Raw Materials, Belgrade, Serbia
Karl-Heinz Spitzer,
Clausthal University of Technology, Department for Process Metallurgy, Clausthal-Zellerfeld, Germany
Velizar Stanković,
University of Belgrade, Technical Faculty in Bor, Bor, Serbia
Nada Štrbac,
University of Belgrade, Technical Faculty in Bor, Bor, Serbia
Nadežda Talijan,
University of Belgrade, Department of Materials and Metallurgy, Institute of Chemistry, Technology and Metallurgy, Belgrade, Serbia
Tamás Török,
University of Miskolc, Faculty of Materials Science and Engineering, Miskolc, Hungary
Alexander L. Udovsky,
Baikov Institute of Metallurgy, Moscow, Russia
Claire Utton,
University of Sheffield, Department of Materials Science and Engineering, Sheffield, UK
Nurni Viswanathan,
Indian Institute of Technology Bombay, Mumbai, India
Jan Vreštal,
Masaryk University, Centre for Nanotechnology and Microtechnology, Brno, Czech Republic
Lijun Wang,
University of Science and Technology Beijing, Collaborative Innovation Center of Steel Technology, Beijing, China
Xidong Wang,
Peking University, Department of Energy and Resources Engineering, Beijing, China
Andrew Watson,
Coventry University, Centre for the Built and Natural Environment, Faculty of Engineering and Computing, Coventry, UK
Lijun Zhang,
Central South University Changsha, State Key Laboratory of Powder Metallurgy, Changsha, China
|
