Journal of Mining and Metallurgy, Section B: Metallurgy - vol. 54 (2) B - 2018

I. Daoud, Dj. Miroud, R. Yamanoglu

Microstructure characterization and quantitative analysis of copper alloy matrix composites reinforced with WC-xNi powders prepared by spontaneous infiltration

J. Min. Metall. Sect. B-Metall. 54 (2) B (2018) 169-177. DOI:10.2298/JMMB171225005D
Full text (pdf)
Export manuscript information:
RIS Format (EndNote, Reference Manager), BibTeX

Abstract

In this study, copper alloy matrix composites reinforced with tungsten carbide (WC) particles with the addition of different Ni contents (0, 3, 5, 7, and 10 wt.%) were prepared by the spontaneous infiltration process. Image analysis was used to quantify the microstructural parameters, such as the particle size and distribution, area fraction, binder mean free path, and pore size. The effect of Ni addition on the microstructure, density and hardness are discussed. The results show that a small addition of Ni improves the densification of the infiltrated composites. The highest density value of 11.84 g/cm3 with a hardness of 327 HV was obtained for the infiltrated composite with the addition of 3 wt.% of Ni. The quantitative analysis results are in good agreement with the microstructure properties and hardness results.
Keywords: Metal matrix composite; WC particles; Image analysis; Quantification; Microstructure
Correspondence Address:
R. Yamanoglu, Kocaeli University, Department of
Metallurgical and Materials Engineering, Izmit, Turkey
email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Creative Commons License
This work is licensed under a
Creative Commons Attribution-
ShareAlike 4.0 International License