Articles in review- Journal of Mining and Metallurgy, Section B: Metallurgy

L. Pan*, X. Bao, G. Gu

Solvent extraction palladium (II) and effective separation of palladium(II) and platinum(IV) with synthetic sulfoxide MSO

Ms. Ref. No.: JMM-B-12-00735

D. Hao, M. Bu, Y. Wang, Y. Tang, Q. Gao, M.Wang, B. Hu, Y. Du*

Thermodynamic modeling of the Na–X (X = Si, Ag, Cu, Cr) systems

Ms. Ref. No.: JMM-B-12-00734

Y.M. Gao*, B. Wang, S.B. Wang, S. Peng

Study on electrolytic reduction with controlled oxygen flow for iron from molten oxide slag containing FeO

Ms. Ref. No.: JMM-B-12-00733

V. Rajković, D. Božić, M. T. Jovanović

Properties of copper-based composite reinforced with Al2O3 particles of different size

Ms. Ref. No.: JMM-B-12-00732

N. Jovićević, V.S. Cvetković, B.S. Radović, Ž.J. Kamberović, J.N. Jovićević

Al-Zn alloy formation by aluminium underpotential deposition from AlCl3+NaCl melts on zinc substrate

Ms. Ref. No.: JMM-B-11-00730

P. Zhu*, L.Y. Wang, Z.Y. Fan, M. Zhou

Electrochemical leaching behavior of copper powder from waste printed circuit board

Ms. Ref. No.: JMM-B-11-00729

A. Krenevičius, R. Kačianauskas, M. Leonavičius, D. Hui, L.Feo

Increasing the cyclic strength of threaded joints through the unloading of cracked sections

Ms. Ref. No.: JMM-B-11-00724

Q.Y. Liu, L.J. Wang*, K.C. Chou

Estimating sulfide capacities for ternary systems with limited solubility

Ms. Ref. No.: JMM-B-11-00722

S.He*, J.Xu, T.Wu and Q.Wang

Mold Fluxes for High- Aluminum-Containing Steel: Problems and Solving Ways

Ms. Ref. No.: JMM-B-11-00721

R. Dimitrijević, O. Cvetković, Z. Miodragović, M. Simić, D. Manojlović, V. Jović*

Sem/edax and xrd characterization of silver nanocrystalline thin film prepared from organometallic solution precursor

Ms. Ref. No.: JMM-B-11-00720

R. Yamanoglu*, E. Karakulak, M. Zeren

Mechanical and wear properties of pre-alloyed molybdenum P/M steels with nickel addition

Ms. Ref. No.: JMM-B-11-00719

J.A. Delgadillo*, M. Al Kayed, D. Vo, A.S. Ramamurthy

CFD simulations of a hydrocyclone in absence of an air core

Ms. Ref. No.: JMM-B-11-00718

A. Zarubica*, D. Kostic, M. Randjelovic, M. Momcilovic, N. Stojkovic, N. Radulovic, P. Putanov

On the impact of alumina on structural and catalytic properties of zirconia in isomerization of n-hexane

Ms. Ref. No.: JMM-B-11-00715

J.C. Fernández-Caliani*, G. Ríos, J. Martínez, F. Jiménez

Occurrence and speciation of copper in slags obtained during the pyrometallurgical processing of chalcopyrite concentrates at the huelva smelter (Spain)

Ms. Ref. No.: JMM-B-11-00714

D.H. Xiao*, X.X. Li, T.C. Yuan, F.Q. Zhang

Effect of Ta addition on the microstructure and properties of Ti-Al-Mo-V alloy

Ms. Ref. No.: JMM-B-11-00709

S.B. Venkata Siva, K. L. Sahoo, G. Srinivasarao, R. I. Ganguly

Mechanical and fracture behaviour of aluminium metal matrix composites reinforced with Silicon Carbide/Alumina Particulates at cast and hot working conditions

Ms. Ref. No.: JMM-B-11-00701

M.H. Khan*, N.C. Das and M.R. Haque

Effect of process variables on reduction kinetics of beach sand magnetite by Boropukuria coal

Ms. Ref. No.: JMM-B-11-00693

M.S. Kaiser

Thermodynamic analysis of the precipitation in wrought Al-6Mg alloy with ternary scandium and quaternary Zirconium and Titanium addition

Ms. Ref. No.: JMM-B-11-00692

W. Wang, B. Yuan and C. Zhou

Ternary interdiffusion coefficicents in α2-phase Ti3Al/Nb system

Ms. Ref. No.: JMM-B-11-00691

J.H. Yao, X.H. Li*, L.P. Pan and X.Y. Liang

Study on the physicochemical properties and acid leaching of indium−bearing zinc ferrite milled by vibration mill

Ms. Ref. No.: JMM-B-11-00690

L. Zheng*, M. Zhang, R. Chellali, H. Bouchikhaoui and J. Dong

Hot corrosion property and mechanism of powder metallurgy EP741NP superalloy

Ms. Ref. No.: JMM-B-11-00682